Silicone Color Matching, Engineered to Your Brand.
From Pantone references to physical swatches, YMS delivers precise, repeatable silicone color development for global pet product brands and private labels. Zero guesswork. Zero batch drift.
Pantone Matching
Any Pantone Code, Faithfully Reproduced in Silicone.
Share a PMS code, TPG, or TCX reference and our color lab will formulate a matching silicone compound. We account for silicone's unique light scattering and surface finish so your brand color stays on-tone across every batch.
-
1
Pantone Solid Coated / Uncoated Full PMS library supported, including neons and metallics (with limitations).
-
2
TPG / TCX Fashion & Home For soft-goods inspired product aesthetics.
-
3
Custom Brand Guidelines Submit CMYK / HEX / RGB values with brand book and we'll translate to silicone.
Physical Sample Matching
Send a Swatch. We Match It -- Even Without a Pantone Code.
Fabric, plastic chip, painted sample, or an existing competitor product. Our lab uses spectrophotometry combined with trained visual evaluation under multiple light sources to match physical references in silicone.
Spectrophotometer Reading
Precise L*a*b* measurement of your submitted sample under D65 standard illuminant.
Visual Lab Review
Human-eye verification under D65, TL84, and A illuminants to prevent metamerism issues.
Finish Adaptation
Matte, satin, or glossy -- surface finish affects perceived color. We calibrate accordingly.
Compounding Process
Five Stages from Pigment to Production-Ready Compound.
Our compounding workflow is documented, repeatable, and archived -- so your color can be reproduced years later.
Pigment Selection
Food-grade, non-migratory pigments compatible with HTV/LSR.
Formula Development
Pigment ratios calculated and logged in our master database.
Lab Mixing
Precision weighing and controlled dispersion in a dust-free environment.
Trial Molding
Chips molded under production conditions to validate color-in-part.
Archive & Scale
Approved formula archived for consistent re-orders at any volume.
Sample Confirmation
Physical Color Chips Shipped for Approval -- Before We Scale.
We produce molded color chips of your actual product material, in your actual thickness and finish, and ship 2-3 variants for comparison. Only after your written sign-off do we proceed to mass production.
Signed Golden Sample
Retained in-house as production reference.
Sample A
PMS 326C
ΔE = 0.8
Sample B
PMS 326C -1%
ΔE = 1.1
Sample C
Custom Coral
ΔE = 0.6
Approved
Golden Standard
Signed & Archived
Multi-Material Harmony
Silicone, Plastic, Metal -- Same Color, Different Chemistry.
Products that combine silicone with PP, ABS, PC, or metal require careful cross-material color control. We maintain parallel formulations for each substrate to ensure visual uniformity in the finished assembly.
Solid Silicone
HTV compound, matte or glossy finish.
Liquid Silicone (LSR)
Platinum-cure, higher clarity base.
PP / ABS Plastic
Masterbatch tuned to match silicone component.
Painted Metal
Spray coating matched to silicone insert.
Note on metamerism: two materials can look identical under daylight but differ under warm indoor light. Our multi-illuminant review catches this before you ship.
Batch Consistency
Order #1 or Order #100 -- the Color Doesn't Drift.
Every production batch is spectrophotometrically compared against the signed golden sample. We maintain a ΔE ≤ 1.5 standard across orders, documented in each shipment's quality report.
ΔE ≤ 1.5
Batch Tolerance
100%
Batches Measured
7+ yrs
Formula Archive
Batch Color Report (Sample)
Batch #YMS-2401-A
Target: PMS 326C
Batch #YMS-2403-B
Target: PMS 326C
Batch #YMS-2406-C
Target: PMS 326C
Batch #YMS-2409-D
Target: PMS 326C
Series Consistency
One Palette Across Your Entire Product Line.
Launch a bowl, mat, water bottle, and treat toy -- all in exactly the same brand teal. We lock a shared palette across SKUs.
SKU 01
Foldable Bowl
SKU 02
Slow Feeder Mat
SKU 03
Travel Bottle
SKU 04
Treat Toy
All four SKUs produced from a single color master formula -- ΔE between units ≤ 1.0.
Dual & Multi-Color
Two-Shot, Overmolded, Marbled, Gradient.
Our molding capabilities include dual-color injection, overmolding of silicone onto plastic or metal, and controlled marbling or gradient effects. Each color in the assembly is matched independently and then verified together.
Supported Combos
Up to 3 colors per part in a single mold.
Color QC
Inspection at Every Stage. Documentation in Every Shipment.
Color QC is not a final step -- it's woven through compounding, molding, and packaging.
Spectro Measurement
L*a*b* and ΔE values recorded for every batch under D65 standard illuminant.
Multi-Light Visual Check
Reviewed under D65, TL84, CWF, and A illuminants in a standard light box.
UV Fade Resistance
Accelerated aging tests to verify color stability under extended light exposure.
Washing & Chemical Test
Repeated dishwasher cycles and contact-safe cleaner exposure to prevent fading.
Shipment Reports
Full color inspection report delivered with every production order.
Compliance-Ready
Documentation suitable for FDA, LFGB, REACH, and brand audit requirements.
Send us your color. We'll send back a silicone chip.
Share a Pantone code, HEX value, physical swatch, or a competitor product. We'll develop a matching silicone sample for your approval -- typically within 7 working days.